Fendt Vario 314
FZ 41-29.1 rot
Order now!
FZ + Fendt Vario 314
The perfect combination.
STOLL always fits. Attach, get going and experience the full power.
- Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
- Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
- All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
- Double-acting lifting cylinders for a particularly high lifting capacity.
- The Z-kinematics frees the view of the implement and ensures even greater lifting power.
- The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
- Safe and reliable parking stands that are easy to use – completely without implements.
- Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.
| PROFILINE NEXT GENERATIONPROFILINE NEXT GENERATION | SIZE 3 SIZE 3 | |||
| PROFILINE NEXT GENERATIONmech. parallel linkage | SIZE 3 FZ 41-29 | |||
| PROFILINE NEXT GENERATIONwithout parallel linkage | SIZE 3 | |||
| PROFILINE NEXT GENERATIONSuitable for tractors with kW/hp | kW hp |
SIZE 3 65-90 90-120 |
||
| PROFILINE NEXT GENERATIONLifting force in the implement’s pivot point | below above |
Q1 Q2 |
daN daN |
SIZE 3 2.880 1.930 |
| PROFILINE NEXT GENERATIONLifting force (blade) 300 mm before the pivot point | below above |
N1 N2 |
daN daN |
SIZE 3 2.880 1.930 |
| PROFILINE NEXT GENERATIONLifting force (pallet) 800 mm before the pivot point | below above |
M1 M2 |
daN daN |
SIZE 3 2.880 1.930 |
| PROFILINE NEXT GENERATIONBreakout force 800 mm before the pivot point | below | R | daN | SIZE 3 3.540 |
| PROFILINE NEXT GENERATIONMaximum lift height in the implement’s pivot point | H | mm | SIZE 3 4.100 | |
| PROFILINE NEXT GENERATIONOverloading height (H-210) | L | mm | SIZE 3 3.890 | |
| PROFILINE NEXT GENERATIONDump height | A | mm | SIZE 3 3.060 | |
| PROFILINE NEXT GENERATIONDump width | W | mm | SIZE 3 790 | |
| PROFILINE NEXT GENERATIONDigging depth | S | mm | SIZE 3 210 | |
| PROFILINE NEXT GENERATIONPivot point of lifting arms | B | mm | SIZE 3 1.945 | |
| PROFILINE NEXT GENERATIONTilt angle | below | X | °degree | SIZE 3 44 |
| PROFILINE NEXT GENERATION | rescooped | X1 | °degree | SIZE 3 61 |
| PROFILINE NEXT GENERATIONDump angle | above | Z | °degree | SIZE 3 57 |
| PROFILINE NEXT GENERATIONPump output rate | l/min. | SIZE 3 90 | ||
| PROFILINE NEXT GENERATIONStroke time | sec. | SIZE 3 3,8 | ||
| PROFILINE NEXT GENERATIONTilting time, implement | sec. | SIZE 3 0,6 | ||
| PROFILINE NEXT GENERATIONDumping time, implement | sec. | SIZE 3 1,3 | ||
| PROFILINE NEXT GENERATIONWeight, lifting arms without implement | kg | SIZE 3 657 |
The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!
2024 STOLL